Dell EMC PowerEdge C6525 Installation And Service Manual

Figure 62. Removing the system battery3. To install a system battery, push the battery holder clip away.4. Insert the battery in the battery holder until the battery holder clip snaps into place.CAUTION: To avoid damage to the battery holder clip, ensure that you do not bend the battery holder clipwhile installing or removing a battery.Figure 63. Installing the system batteryNext steps1. Follow the procedure listed in After working inside your system.2. Confirm that the battery is operating properly, by performing the following steps:a. Enter the System Setup, while booting, by pressing F2.b. Enter the correct time and date in the System Setup Time and Date fields.c. Exit the System Setup.d. To test the newly installed battery, remove the system from the enclosure for at least an hour.e. Reinstall the system into the enclosure after an hour.f. Enter the System Setup and if the time and date are still incorrect, see Getting help section.Installing and removing system components 65