Dell EMC PowerEdge C6525 Installation And Service Manual

For more information, see iDRAC User's Guide, at www.dell.com/idracmanuals.Restoring the system using Easy RestoreThe easy restore feature enables you to restore your service tag, license, UEFI configuration, and the system configuration dataafter replacing the system board. All data is backed up in a backup flash device automatically. If BIOS detects a new systemboard, and the service tag in the backup flash device, BIOS prompts the user to restore the backup information.About this taskBelow is a list of options available:● Restore the service tag, license, and diagnostics information, press Y● Navigate to the Lifecycle Controller based restore options, press N.● Restore data from a previously created Hardware Server Profile, press F10NOTE: When the restore process is complete, BIOS prompts to restore the system configuration data.● To restore the system configuration data, press Y● To use the default configuration settings, press NNOTE: After the restore process is complete, system reboots.Manually update the Service TagAfter replacing a system board, if Easy Restore fails, follow this process to manually enter the Service Tag, using SystemSetup.About this taskIf you know the system service tag, use the System Setup menu to enter the service tag.Steps1. Power on the system.2. To enter the System Setup, press F2.3. Click Service Tag Settings.4. Enter the service tag.NOTE: You can enter the service tag only when the Service Tag field is empty. Ensure that you enter the correctservice tag. Once the service tag is entered, it cannot be updated or changed.5. Click OK.Trusted Platform ModuleUpgrading the Trusted Platform ModulePrerequisitesNOTE:● Ensure that your operating system supports the version of the TPM module being installed.● Ensure that you download and install the latest BIOS firmware on your system.● Ensure that the BIOS is configured to enable UEFI boot mode.Installing and removing system components 69