Dell EMC PowerEdge R740 Installation And Service Manual

Contents

Figure 60. Installing expansion card into expansion card riser 3Next steps1 If applicable, connect the cables to the expansion card.2 If applicable, install the air shroud.3 Follow the procedure listed in After working inside your system.4 Install any device drivers required for the card as described in the documentation for the card.Related linksOpening and closing the PCIe card holder latchInstalling the air shroudRemoving riser 2 and 3 blankPrerequisites1 Follow the safety guidelines listed in Safety instructions.2 Follow the procedure listed in Before working inside your system.3 Remove the air shroud.Steps1 Using Phillips #2 screwdriver, loosen the screws (3) that secure the blank to the system.2 Press the release tab, and holding the blank by its edges, lift the blank away from the system.112 Dell EMC PowerEdge R740 Installation and Service ManualInstalling and removing system components