Dell EMC PowerEdge T440 Installation And Service Manual

Also see for EMC PowerEdge T440: Manual Installation and service manual Simple operation manual Manual User manual

Next steps1. Follow the procedure listed in After working inside your system.2. While booting, press F2 to enter System Setup and verify that the system detects the USB memory key.Expansion card holderRemoving the expansion card holderPrerequisites1. Follow the safety guidelines listed in Safety instructions.2. Follow the procedure listed in Before working inside your system.3. Remove the air shroud.StepsPress the tab and remove the expansion-card holder from the chassis.Figure 59. Removing the expansion card holderNext steps1. Install the air shroud.2. Follow the procedure listed in After working inside your system.Installing the expansion card holderPrerequisites1. Follow the safety guidelines listed in Safety instructions.2. Follow the procedure listed in Before working inside your system.StepsAlign the expansion card holder with the projections on the chassis and push it down until firmly seated.Installing and removing system components 73