Replacing the drives in to thehard-drive cageWARNING: Before working inside your Embedded Box PC, read the safetyinformation that shipped with your Embedded Box PC and follow the stepsin Before working inside your Embedded Box PC. After working inside yourEmbedded Box PC, follow the steps in After working inside your EmbeddedBox PC. For more safety best practices, see the Regulatory Compliancehome page at www.dell.com/regulatory_compliance.CAUTION: Hard drives/solid-state drives are fragile. Exercise care whenhandling the Solid-state/hard drive.ProcedureNOTE: If the Embedded Box PC is shipped with two drives, the bottom drivehas to be replaced first. For more information see, Procedure to replacebottom drive.1 Insert the drive into the hard-drive cage.2 Align the screw holes on the drive with the screw holes on the hard-drive cage.3 Replace the screws that secure the hard drive to the hard-drive cage.Procedure to replace bottom drive1 Insert the bottom drive into the bottom slot of the hard-drive cage and push itdown into place.2 Align the screw holes on the bottom drive with the screw holes on the hard-drivecage.3 Replace the screws that secure the bottom drive to the hard-drive cage.Post-requisitesFollow step 2 to step 8 in “Replacing the back cover”.30