Dell Force10 MXL Blade Getting Started Manual

Also see for Force10 MXL 10 GbE: Manual Manual Deployment guide

Dell Force10 MXL Blade Getting Started Manual Manual pdf 14 page image

14 Installing and Configuring the SwitchUnpacking the SwitchPackage ContentsWhen unpacking each switch, make sure that the following items areincluded:• One Dell Force10 MXL 10/40GbE Switch IO Module• One USB type A-to-DB-9 female cable• Getting Started Guide• Safety and Regulatory Information• Warranty and Support Information• Software License AgreementUnpacking StepsNOTE: Before unpacking the switch, inspect the container and immediately report anyevidence of damage.1 Place the container on a clean, flat surface and cut all straps securing thecontainer.2 Open the container or remove the container top.3 Carefully remove the switch from the container and place it on a secureand clean surface.4 Remove all packing material.5 Inspect the product and accessories for damage.Installing and Configuring theSwitchAfter you unpack the MXL 10/40GbE Switch, refer to the flow chart inFigure 1-6 for an overview of the steps you must follow to install the bladeand perform the initial configuration.You can check to see that a switch is running the latest FTOS version by enteringthe show version command. To download an FTOS version, go to http://support.dell.com.