Wireless Mini-Card 27CAUTION: When the Mini-Card is not in the computer, store it in protectiveantistatic packaging. For more information, see "Protecting Against ElectrostaticDischarge" in the safety information that shipped with your computer.Replacing the Mini-Card1 Follow the instructions in "Before You Begin" on page 9.2 Remove the new Mini-Card from its packaging.CAUTION: Use firm and even pressure to slide the card into place. If you useexcessive force, you may damage the connector.CAUTION: The connectors are keyed to ensure correct insertion. If you feelresistance, check the connectors on the card and on the system board, and realignthe card.CAUTION: To avoid damage to the Mini-Card, never place cables under the card.3 Insert the Mini-Card connector at a 45-degree angle into the connector onthe system-board.