Display 63Replacing the Display Panel1 Follow the instructions in "Before You Begin" on page 9.2 Attach the display cable to the back of the display panel.3 Connect the display cable to the display-board connector and secure itwith the tape.4 Align the screw holes on the display bracket with the screw holes on thedisplay panel and replace the four screws (two on each side).5 Route the display cable and Mini-Card antenna cables through the routingguides on the display hinges.6 Align the screw holes on the display panel with the screw holes on thedisplay cover and replace the six screws.7 Replace the display bezel. See "Replacing the Display Bezel" on page 60.8 Replace the display assembly. See "Replacing the Display Assembly" onpage 58.CAUTION: Before turning on the computer, replace all screws and ensure that nostray screws remain inside the computer. Failure to do so may result in damage tothe computer.1 tape 2 display-board connector3 display cable123