Dell Inspiron 14 Intel Service Manual

Also see for Inspiron N4020: User guide Setup guide Service manual

2. Align the notch in the memory module with the tab in the memory- module connector.3. Slide the memory module firmly into the slot at a 45-degree angle, and press the memory module down until it clicks into place. If you do not hear theclick, remove the memory module and reinstall it.4. Replace the module cover (see Replacing the Module Cover).5. Replace the battery (see Replacing the Battery), or connect the AC adapter to your computer and an electrical outlet.6. Turn on the computer.As the computer boots, it detects the memory module(s) and automatically updates the system configuration information.To confirm the amount of memory installed in the computer:Windows® Vista:Click Start ® Help and Support® Dell System Information.Windows® 7:Click Start ® Control Panel® System and Security® System.Back to Contents PageNOTE: If the memory module is not installed properly, the computer may not boot.1 tab 2 notchCAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so mayresult in damage to the computer.