Great user manuals database on UserManuals.infoBack to Contents PageFanDell™ Inspiron™ 1420/Dell Vostro™ 1400Service ManualRemoving the FanReplacing the FanRemoving the Fan1. Follow the instructions in Before You Begin.2. Remove the system board (see Removing the System Board).3. Remove the three M2.5 x 5-mm screws securing the fan to the system board.4. Loosen the shoulder screw securing the fan to the system board.5. Disconnect the fan connector from the system board connector.6. Lift the fan out of the computer.Replacing the Fan1. Follow the instructions in Before You Begin.2. Follow the instructions in Removing the Fan.3. For replacement of the fan, perform the steps in Removing the Fan in reverse order.CAUTION: Before you perform any of the procedures in this section, follow the safety instructions in the Product Information Guide.NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metalsurface, such as the back panel on the computer.1 screw (3) 2 fan3 shoulder screw 4 system boardCAUTION: Before you perform any of the procedures in this section, follow the safety instructions in the Product Information Guide.NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metalsurface, such as the back panel on the computer.