Dell Inspiron 1420 Service Manual

Also see for Inspiron 1420: Owner's manual Setup guide Service manual Setting up

Great user manuals database on UserManuals.infoReplacing the Memory Module1. Align the notch in the module edge connector with the tab in the connector slot.2. Slide the module firmly into the slot at a 30-degree angle, and rotate the module down until it clicks into place. If you do not feel the click, remove themodule and reinstall it.3. Slide the memory module firmly into the slot at a 45-degree angle, and then rotate the module down until it clicks into place.If you do not feel the click, remove the memory module and reinstall it.4. Insert the battery into the battery bay or connect the AC adapter to your computer and an electrical outlet.5. Turn on the computer.As the computer boots, it detects the additional memory and automatically updates the system configuration information.To confirm the amount of memory installed in the computer, click Start ® Help and Support® Dell System Information.Back to Contents Page1 memory module 2 securing clip s(2)NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface(such as a connector on the back of the computer).NOTE: If the memory module is not installed properly, the computer may not boot. No error message indicates this failure.1 tab 2 notch 3 memory module