Display 61Replacing the Display Cable1 Follow the instructions in "Before You Begin" on page 9.2 Connect the display cable to the connector on the display panel and secureit with the tape.3 Turn the display panel over and place it on the display cover.4 Replace the display panel (see "Replacing the Display Panel" on page 59).5 Replace the display bezel (see "Replacing the Display Bezel" on page 58).6 Replace the display assembly (see "Replacing the Display Assembly" onpage 56).CAUTION: Before turning on the computer, replace all screws and ensure that nostray screws remain inside the computer. Failure to do so may result in damage tothe computer.Hinge CapsRemoving the Hinge Caps1 Follow the instructions in "Before You Begin" on page 9.2 Remove the display assembly (see "Removing the Display Assembly" onpage 53).3 Remove the display bezel (see "Removing the Display Bezel" on page 57).4 Remove the six screws that secure the display panel to the display cover.5 Turn the display panel over and keep it on a clean surface.6 Press both sides of each hinge cap and lift the hinge caps out of the displayhinges.
