Dell Inspiron 1425 Service Manual

Also see for Inspiron 1425: Setup guide

Contents

VGA Connector Board 7316VGA Connector BoardWARNING: Before working inside your computer, read the safety informationthat shipped with your computer. For additional safety best practices information,see the Regulatory Compliance Homepage at dell.com/regulatory_compliance.CAUTION: Only a certified service technician should perform repairs on yourcomputer. Damage due to servicing that is not authorized by Dell is not covered byyour warranty.CAUTION: To avoid electrostatic discharge, ground yourself by using a wristgrounding strap or by periodically touching an unpainted metal surface (such as aconnector on your computer).CAUTION: To help prevent damage to the system board, remove the main battery(see "Removing the Battery" on page 15) before working inside the computer.Removing the VGA Connector Board1 Follow the instructions in "Before You Begin" on page 9.2 Remove the battery (see "Removing the Battery" on page 15).3 Remove the keyboard (see "Removing the Keyboard" on page 27).4 Remove the palm-rest assembly (see "Removing the Palm-Rest Assembly"on page 31).5 Remove the display assembly (see "Removing the Display Assembly" onpage 53).6 Remove the hinge cover (see "Removing the Hinge Cover" on page 69).7 Remove the screw that secures the VGA connector board to the systemboard.8 Disconnect the display cable from the connector on the system board.9 Lift the VGA connector board off the system board.