Dell Inspiron 1440 Service Manual

Also see for Inspiron 1440: User guide Setup guide Service manual

Replacing the Mini-Card1. Remove the new Mini-Card from its packaging.2. Insert the Mini-Card at a 45-degree angle into the appropriate system board connector.3. Press the other end of the Mini-Card down into the slot on the system board and replace the screw that secures the Mini-Card to the system boardconnector.4. Connect the appropriate antenna cables to the Mini-Card. The following table provides the antenna cable color scheme for the Mini-Card supported byyour computer.5. Secure unused antenna cables in the protective mylar sleeve.6. Replace the module cover (see Replacing the Module Cover).7. Replace the battery (see Replacing the Battery).8. Install the drivers and utilities for your computer, as required. For more information, see the Dell Technology Guide.Back to Contents PageCAUTION: Use firm and even pressure to slide the card into place. If you use excessive force, you may damage the connector.CAUTION: The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors on the card and on the systemboard, and realign the card.CAUTION: To avoid damage to the Mini-Card, never place cables under the card.Connectors on the Mini-Card Antenna Cable Color SchemeWLAN (2 antenna cables)Main WLAN (white triangle)Auxiliary WLAN (black triangle)whiteblackNOTE: If you are installing a communication card from a source other than Dell, you must install the appropriate drivers and utilities. For more genericdriver information, see the Dell Technology Guide.