Dell Inspiron 1440 Service Manual

Also see for Inspiron 1440: User guide Setup guide Service manual

Back to Contents PagePower Button BoardDell™ Inspiron™ 1440 Service ManualRemoving the Power Button BoardReplacing the Power Button BoardRemoving the Power Button Board1. Follow the procedures in Before You Begin.2. Remove the battery (see Removing the Battery).3. Remove the center control cover (see Removing the Center Control Cover).4. Remove the keyboard (see Removing the Keyboard).5. Release the power button board cable lock and disconnect the power button board cable from the system board connector.6. Using a plastic scribe, pry out the power button board to release it from the palm rest.7. Lift the power button board off the palm rest.Replacing the Power Button Board1. Align the holes on the power button board with the protrusion on the palm rest and keep it in place.2. Slide the power button board cable into the connector on the system board. Press down the power button board cable lock to secure the cable to thesystem board connector.WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety bestpractices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metalsurface.CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™is not covered by your warranty.CAUTION: To help prevent damage to the system board, remove the main battery (see Removing the Battery) before working inside thecomputer.CAUTION: The power button board is glued to the palm rest. Do not pull on the power button board cable to remove the power button board.1 power button board 2 power button board connector3 power button board cable lock