46 | Replacing the Power-Adapter PortReplacing the Power-Adapter PortWARNING: Before working inside your computer, read the safety informationthat shipped with your computer and follow the steps in "Before You Begin" onpage 9. After working inside your computer, follow the instructions in "AfterWorking Inside Your Computer" on page 11. For additional safety best practicesinformation, see the Regulatory Compliance Homepage atdell.com/regulatory_compliance.Procedure1 Slide the power-adapter port into position.2 Route the power-adapter-port cable through the routing guides on thecomputer base.3 Connect the power-adapter-port cable to the system board.4 Adhere the display cable to the fan.5 Slide the display cable into the system-board connector and press down on theconnector latch to secure the cable.6 Adhere the tape to the system board.Postrequisites1 Replace the palm-rest. See "Replacing the Palm-Rest" on page 36.2 Replace the keyboard. See "Replacing the Keyboard" on page 20.3 Follow the instructions from step 3 to step 5 in "Replacing the Hard Drive" onpage 28.4 Replace the base cover. See "Replacing the Base Cover" on page 22.5 Replace the battery. See "Replacing the Battery" on page 13.