Back to Contents PageDisplayDell™ Inspiron™ 1546 Service ManualDisplay AssemblyDisplay BezelDisplay PanelDisplay Panel CableDisplay HingesDisplay AssemblyRemoving the Display Assembly1. Follow the procedures in Before You Begin.2. Remove the battery (see Removing the Battery).3. Remove the module cover (see Removing the Module Cover).4. Remove the memory module(s) (see Removing the Memory Module(s)).5. Remove the hard drive (see Removing the Hard Drive).6. Remove the Mini-Card (see Removing the Mini-Card).7. Make note of the Mini-Card antenna cables routing and remove the cables from the routing guides.8. Remove the two screws from the computer base.WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety bestpractices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™is not covered by your warranty.CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metalsurface (such as a connector on your computer).CAUTION: To help prevent damage to the system board, remove the main battery (see Removing the Battery) before working inside thecomputer.1 Mini-Card cable routing