Dell Inspiron 20 3000 Service Manual

Also see for Inspiron 20 3000 Series: Service manual Service manual Quick start guide Quick start guide Quick start guide

Contents

Dell Inspiron 20 3000 Service Manual Manual pdf 66 page image

Removing the system boardWARNING: Before working inside your computer, read the safetyinformation that shipped with your computer and follow the steps in Beforeworking inside your computer. After working inside your computer, followthe instructions in After working inside your computer. For more safety bestpractices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.NOTE: Your computer’s Service Tag is stored in the system board. Youmust enter the Service Tag in the BIOS setup program after you replace thesystem board.NOTE: Replacing the system board removes any changes you have made tothe BIOS using the BIOS setup program. You must make the appropriatechanges again after you replace the system board.NOTE: Before disconnecting the cables from the system board, note thelocation of the connectors so that you can reconnect the cables correctlyafter you replace the system board.Prerequisites1 Remove the stand.2 Follow the procedure from step 1 to step 2 in “Removing the optical drive”.3 Remove the back cover.4 Remove the system-board shield.5 Remove the heat sink.6 Remove the memory module.7 Remove the wireless card.Procedure1 Disconnect the fan cable, hard-drive and optical-drive power cable, optical-drivedata cable, hard-drive data cable, microphone and camera cable, speaker cable,display-panel power cable, and touch-board cable from the system board.66