106 Ad di ng an d Rep lac ing Pa rtsw w w . d e l l . c o m | s u p p o r t . d e l l . c o mAdding MemoryYou can increase your computer memory by installing memory modules on the systemboard. See "Specifications" on page 116 for information on the memory supported by yourcomputer. Be sure to add only memory modules that are intended for your computer.NOTE: Memory modules purchased from Dell are covered under your computer warranty.CAUTION: Before working inside your Dell™ computer, read the safetyinstructions on page 16.1 Save and close any open files, exit any open programs, and shut down the computer(see "Turning Off Your Computer" on page 42).2 If the computer is connected to a docking device (docked), undock it. See thedocumentation that came with your docking device for instructions.3 Remove all installed batteries, and disconnect the AC adapter cable and any externaldevices from the computer. Wait 5 seconds before proceeding.4 Ground yourself by touching a metal connector on the back of the computer, andcontinue to do so periodically during this procedure.NOTICE: While you work, periodically touch unpainted metal on the computer to dissipatestatic electricity that might harm internal components.5 Turn the computer over, remove the screw from the memory module cover, and lift thecover.3Y647bk0.book Page 106 Wednesday, April 2, 2003 3:24 PM
