72 Solving Problemsw w w . d e l l . c o m | s u p p o r t . d e l l . c o m 6 Wipe off the battery and put it in a safe place to dry.7 Remove the hard drive (see "Replacing the Hard Drive" on page 86).8 Remove the memory module(s) (see "Adding Memory" on page 81).9 Open the display and place the computer right-side up across two books or similar props tolet air circulate all around it. Let the computer dry for at least 24 hours in a dry area atroom temperature.CAUTION: To help prevent electrical shock, verify that the computer is thoroughly dry beforecontinuing with the rest of this procedure.NOTICE: Do not use artificial means, such as a hair dryer or a fan, to speed the drying process.10 Ground yourself by touching one of the metal connectors on the back of the computer.11 Replace the memory module(s), the memory module cover, and the screw(s).12 Replace the hard drive.13 Replace the module bay device and any PC Cards you removed.14 Replace the battery.15 Turn on the computer.If the computer does not start, or if you cannot identify the damaged components, contact Dell(see "Contacting Dell" on page 100).If You Drop or Damage Your Computer1 Save and close any open files, exit any open programs, and shut down the computer(see "Turning Off Your Computer" on page 27).2 Disconnect the AC adapter from the computer and from the electrical outlet.3 Turn off any attached external devices, and disconnect them from their power sources andthen from the computer.4 Remove and reinstall the battery.5 Turn on the computer.If the computer does not start, or if you cannot identify the damaged components, contact Dell(see "Contacting Dell" on page 100).