Running the Dell Diagnostics 4-91XPEHURI7LPHVWR5HSHDW7HVW V This parameter specifies the number of times the tests run when you select Run. Tochange the default, type in the desired value. If you type 0 (zero), the test is run untilyou press .0D[LPXP(UURUV$OORZHGThis parameter specifies the maximum number of errors that can occur before testingis suspended. The error count begins from zero each time you run a subtest or testgroup individually or each time you select All to run all of them. To change the default,type in the desired value. If you type 0 (zero), testing continues, regardless of thenumber of errors found, until you press .3DXVHIRU8VHU5HVSRQVHIf this parameter is set to Yes, the diagnostics pauses when one of the followingoccurs:á Your interaction is needed to verify the Video test group screens, the Keyboardtest group key functions, or other types of interaction such as inserting a diskette.á The maximum error limit is reached.To continue testing, press any key.7DEOH2SWLRQ3DUDPHWHUV2SWLRQ/LPLW 3RVVLEOH9DOXHVNumber of Times toRepeat Test(s)0001 through 9999, or 0000, which loops indefinitely untilyou press the and keys. The default is 0001.Maximum ErrorsAllowed0000 through 9999, where 0000 means that there is noerror limit. The default is 0001.Pause for UserResponseYes, NoAllows you to decide whether tests will wait for user input.The default is Yes (to wait for user input).Output Device forStatus MessagesDisplay, Printer, FileIf you have a printer attached to the computer, you can useit to print thestatus messages, if any, that are generatedwhen a test runs. (The printer must be turned on and in theonline mode to print.) If you select File, the status mes-sages are printed to a file named result on the diagnosticsdiskette. The default is Display.Output Device forError MessagesDisplay, Printer, FileIf you have a printer attached to the computer, you can useit to print theerror messages, if any, that are generatedwhen a test runs. (The printer must be turned on and in theonline mode to print.) If you select File, the error messagesare printed to a file named result on the diagnostics dis-kette. The default is Display.
