Replacing the Processor Heat-Sink | 10645 Replacing the Processor Heat-SinkWARNING: Before working inside your computer, read the safety informationthat shipped with your computer and follow the steps in "Before You Begin" onpage 8. For additional safety best practices information, see the RegulatoryCompliance Homepage at dell.com/regulatory_compliance.Procedure1 Align the captive screws on the processor heat-sink with the screw holes on thesystem board.2 In sequential order (indicated on the processor heat-sink), tighten the captivescrews that secure the processor heat-sink to the system board.Postrequisites1 Follow the instructions from step 4 to step 7 in "Replacing the System Board" onpage 102.2 Replace the fan. See "Replacing the Fan" on page 64.3 Replace the speakers. See "Replacing the Speakers" on page 68.4 Follow the instructions from step 5 to step 8 in "Replacing the Hard Drive" onpage 38.5 Follow the instructions from step 4 to step 5 in "Replacing the Optical Drive" onpage 42.6 Replace the memory module(s). See "Replacing the Memory Module(s)" on page 32.7 Replace the palm rest. See "Replacing the Palm Rest" on page 48.8 Replace the keyboard. See "Replacing the Keyboard" on page 24.9 Replace the base cover. See "Replacing the Base Cover" on page 28.10 Replace the battery. See "Replacing the Battery" on page 18.11 Follow the instructions in "After Working Inside Your Computer" on page 10.