Dell Inspiron N5110 Service Manual

Also see for Inspiron N5110: Service manual Setup guide Setup guide

Back to Contents PagePalm-Rest AssemblyDell™ Inspiron™ N5110 Service ManualRemoving the Palm-Rest AssemblyReplacing the Palm-Rest AssemblyRemoving the Palm-Rest Assembly1. Follow the instructions in Before You Begin.2. Remove the battery (see Removing the Battery).3. Remove the six screws that secure the palm-rest assembly to the computer base.4. Turn the computer over and open the display as far as possible.5. Remove the keyboard (see Removing the Keyboard).6. Remove the four screws on the palm-rest assembly.7. Disconnect the power-button board cable, touch-pad cable, and hot-key board cable from the connectors on the system board.WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety bestpractices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance.CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell isnot covered by your warranty.CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metalsurface (such as a connector on your computer).CAUTION: To help prevent damage to the system board, remove the main battery (see Removing the Battery) before working inside thecomputer.CAUTION: Pull on the plastic tab on top of the connectors to avoid damaging the connectors.