44 Using the Keyboardw w w . d e l l . c o m | s u p p o r t . d e l l . c o m • To select and move (or drag) an object, position the cursor on the object and tap twice on thetouch pad. On the second tap, leave your finger on the touch pad and move the selectedobject by sliding your finger over the surface.• To double-click an object, position the cursor on the object and tap twice on the touch pad oruse your thumb to press the left touch-pad button twice.You can also use the track stick to move the cursor. Press the track stick left, right, up, or down tochange the direction of the cursor on the display. Use the track stick and track stick buttons as youwould use a mouse.Customizing the Touch Pad and Track StickYou can use the Mouse Properties window to disable the touch pad and track stick or adjust theirsettings.1 Open the Control Panel, and then click Mouse. For information about the Control Panel,access the Help and Support Center (click Start→ Help and Support).2 In the Mouse Properties window:• Click the Device Select tab to disable the touch pad and track stick.• Click the Touch Pad tab to adjust touch pad and track stick settings.3 Click OK to save the settings and close the window.Changing the Track Stick CapYou can replace your track stick cap if it wears down from prolonged use or if you prefer a differentcolor. You can purchase additional caps by visiting the Dell website at dell.com.