Dell LATITUDE PRX System Information Manual

Also see for Latitude C/Port II APR: System information guide System information guide

Contents

Dell Latitude C/Port II APR System Infor mation Guide 1912 Continue to follow the prompts to complete the installation.The Windows desktop appears and the installation is complete.Docking for the First Time With Windows 951 Dock and turn on your computer.2 Either press during the system boot routine, or press after your computer boots to view the system setupprogram.3 Set Docking IRQ to Optimized.4 Set Universal Connect to Enabled.5 Exit the system setup program.The computer automatically detects new hardware.6 Click Yes at the System Settings Change window.The computer restarts and automatically detects new hardware.7 Click OK at the Network window.8 Select the Identification tab at the next Network window.9 Enter a Computer Name and Workgroup that will identify yourcomputer on the network, and click Close.If you are unsure what Computer Name and Workgroup to enter,check with your System Administrator.NOTE: You must enter a Computer Name and Workgroup to proceed with thedriver installation.The computer automatically copies files and builds a driverinformation database.10 Click OK at the Configuration Setup window.11 Follow the prompts to complete the installation.The Windows desktop appears and the installation is complete.NOTE: To use the USB connectors, you must install the USB supplement fromyour ResourceCD in the Win95\OSUpdate directory. If you install the USBsupplement, your computer cannot enter suspend mode. Dell recommends thatyou do not install the USB supplement unless you intend to use USB devices.