Installing WLAN card1 Insert the WLAN card into the connector on the system board.2 Connect the WLAN cables to the connectors on the WLAN card.3 Place the metal bracket and tighten the M2.0 x 3.0 screw to secure it to the computer.4 Install the base cover.5 Follow the procedure in After working inside your computer.Memory moduleRemoving memory module1 Follow the procedure in Before working inside your computer.2 Remove the base cover.3 To remove the memory module:a Pull the clips securing the memory module until the module snaps-out [1].b Remove the memory module from the connector on the system board [2].Removing and installing components 19