Dell Latitude 7380 Owner's Manual

Also see for Latitude 7380: Service manual Owner's manual

NOTE: To identify the number of screws, see screw list3 To remove the display assembly:a Un route the WLAN and WWAN cables from the routing channels [1].b Remove the M2.0 x 5.0 screws that secures the eDP bracket [2].c Lift the eDP bracket from the eDP cable [3].d Disconnect the eDP cable from its connector on the system board [4].NOTE: In touch-configuration system, you need to remove the touch display cable connected to itsconnector on the system board.e Remove the adhesive tape that secures the eDP cable [5].NOTE: In touch-configuration system you will find both eDP cable and touch display cable secured withadhesive tape.4 To remove the display assembly:a Open the display of the computer and lay it on a flat surface at 180 degree angleb Remove the M2.5 x 4.0 screws that secure the display hinge to the display assembly [1].c Lift the display assembly from the computer.28 Removing and installing components