l To select and move (or drag) an object, position the cursor on the object. Then press and hold the left track stick button. Leave your thumb on thebutton and move the object by pressing the track stick in the desired direction.l To double-click an object, position the cursor on the object and tap twice on the track stick, or use your thumb to press the left track stick button twice.Customizing the Touch Pad and Track StickYou can disable the touch pad and track stick or adjust their settings by using the Mouse Properties window.1. In Windows XP, open the Control Panel, click Printers and Other Hardware and click Mouse.In Windows 2000, open the Control Panel and double-click the Mouse icon.2. On the Mouse Properties window:l Click the Device Select tab and select Stick, Stick and Pad, or Pad only.l Click the Touch Pad tab to adjust the touch pad settings or the Stick tab to adjust the track stick settings.3. Select the desired settings and click Apply.4. Click OK to save the settings and close the window.Changing the Track Stick CapYour computer came with an additional track stick cap. You can purchase additional caps by visiting the Dell website at www.dell.com. You may need tochange the track stick cap if it wears down from prolonged use.1. Pull the cap off the track stick.2. Align the new cap over the square track stick post and gently press the cap down onto the post.3. Test the track stick to ensure that the cap is seated properly.Back to Contents PageDownloaded from www.Manualslib.com manuals search engine