7. Ground yourself and install the new memory module:a. Align the notch in the module with the slot in the center of the connector.b. Slide the edge of the module firmly into the connector, and rotate the module down until you feel a click. If you do not feel the click, remove themodule and reinstall it.8. Replace the cover and screw.9. Insert the battery into the battery bay, or connect the AC adapter to your computer and an electrical outlet.10. Turn on the computer.As the computer boots, it detects the additional memory and automatically updates the system configuration information.Adding a Mini PCI CardIf you ordered a Mini PCI card at the same time that you ordered your computer, Dell has already installed the card for you.1. Ensure that the work surface is flat and clean to prevent scratching the computer cover.2. Save and close any open files, exit any open programs, and shut down the computer.3. If the computer is connected to a docking device (docked), undock it. See the documentation that came with your docking device for instructions.NOTICE: If you need to install memory modules in two connectors, install a memory module in the connector labeled "JDIM (DIMMA)" before youinstall a module in the connector labeled "JDIM2 (DIMMB)."NOTE: If the memory module is not installed properly, the computer does not boot. No error message indicates this failure.NOTICE: If the memory module cover is difficult to close, remove the module and reinstall it. Forcing the cover to close may damage yourcomputer.NOTICE: When you turn on your computer, you might receive a message stating that you need to shut down your computer and upgrade yourcomputer memory. If this message appears, see your User's Guide on the Dell Support website (support.dell.com) for instructions aboutupgrading your computer memory.CAUTION: FCC rules strictly prohibit users from installing 5-GHz (802.11a, 802.11a/b, 802.11a/b/g) Wireless LAN Mini PCI cards. Under nocircumstances should the user install such a device. Only trained Dell service personnel are authorized to install a 5-GHz Wireless LAN Mini PCIcard.If you are removing and/or installing a 2.4-GHz (802.11b, 802.11b/g) Mini PCI card, follow the instructions noted below. Only productsapproved for use in your portable computer may be installed. Approved Mini PCI cards may be purchased only from Dell.NOTE: 2.4-GHz Wireless LAN PC Cards may be removed and installed by the user.NOTE: Handle components and cards by their edges, and avoid touching pins and contacts.CAUTION: Before working inside your computer, read the safety instructions in your Product Information Guide.Downloaded from www.Manualslib.com manuals search engine