14 Using Your ProjectorNOTE: If you press the Power button while the projector is running, the"Press Power Button To Turn Off Projector" message appears on the screen. Toclear the message, press a button on the control panel. The message disappears after5 seconds.Adjusting the Projected ImageRaising the Projector Height1 Press the Elevator button.2 Raise the projector to the desired display angle, and then release the button tolock the elevator foot into position.3 Use the tilt adjustment wheel to fine-tune the display angle.Lowering the Projector Height1 Press the Elevator button.2 Lower the projector, and then release the button to lock the elevator foot intoposition.1 Elevator button2 Elevator foot3 Tilt adjustment wheel13 32