Using Your Projector 25VERTICAL POSITION —Press to move the image down and to move the imageup.FREQUENCY —Allows you to change the display data clock frequency to match thefrequency of your computer graphics card. If you see a vertical flickering bar, useFrequency control to minimize the bars. This is a coarse adjustment.TRACKING—Allows you to synchronize the phase of the display signal with thegraphic card. If you experience an unstable or flickering image, use Tracking tocorrect it. This is a fine adjustment.DISPLAY (in Video Mode)VIDEO MODE—Allows you tooptimize the projector'sdisplay mode.•PC, Movie, sRGB -provides accurate colorrepresentation•Game, and Custom - setyour preferred settingsNOTE: If you adjustthe settings for WhiteIntensity or Degamma, theprojector automatically switches to Custom.SIGNAL TYPE —Allows you to manually select the signal type. You set the signal typeto RGB, YCbCr, or YPbPr.ZOOM —Press to digitally magnify a default area of image in the center of thescreen and press to reduce the zoomed image.ZOOM NAVIGATION —Press to navigate projection screen.WHITE INTENSITY —Set 0 to maximize the color reproduction and 10 to maximizethe brightness.DEGAMMA —Allows you to adjust the color performance of the display. You can setthe Degamma value to: 1, 2, 3, and 4. Adjust among the 4 preset values to changethe color performance of the display.Downloaded From projector-manual.com DELL Manuals