Dell N2024 Getting Started Manual

Also see for N20 Series: Installation guide

Contents

Dell N2024 Getting Started Manual Manual pdf 17 page image

Getting Started Guide 15Unpacking the N20xx SwitchPackage ContentsWhen unpacking each switch, make sure that the following items areincluded:• One Dell Networking switch• One RJ-45 to DB-9 female cable• One rack-mount kit (N20xx) for rack installation, two mounting brackets,bolts, and cage nuts• One set of self-adhesive rubber pads for the free-standing switch (four padsare included)Unpacking StepsNOTE: Before unpacking the switch, inspect the container and immediately reportany evidence of damage.1 Place the container on a clean, flat surface and cut all straps securing thecontainer.2 Open the container or remove the container top.3 Carefully remove the switch from the container and place it on a secureand clean surface.4 Remove all packing material.5 Inspect the product and accessories for damage.Rack Mounting a N20xx SwitchWARNING: Read the safety information in the Safety and Regulatory Informationas well as the safety information for other switches that connect to or support theswitch.The AC power connector is on the back panel of the switch.Installing in a RackWARNING: Do not use rack mounting kits to suspend the switch from under atable or desk, or attach it to a wall.