Dell N2024 Getting Started Manual

Also see for N20 Series: Installation guide

Contents

Dell N2024 Getting Started Manual Manual pdf 61 page image

Getting Started Guide 59Step 6:If the information is correct, please enter (Y) tosave the configuration and copy the settings to thestart-up configuration file. If the information isincorrect, enter (N) to discard the configuration andrestart the wizard: [Y/N] yThank you for using the Dell Easy Setup Wizard. Youwill now enter CLI mode.Applying Interface configuration, please wait...Next StepsAfter completing the initial configuration described in this section, you canconnect the OOB port to your management network for out-of-band remotemanagement, or you can connect any of the front-panel switch ports to yourproduction network for in-band remote management.If you specified DHCP for the OOB or VLAN 1 management interface IPaddress, the interface will acquire its IP address from a DHCP server on thenetwork. To discover the dynamically-assigned IP address, use the consoleport connection to issue the following commands:• For the OOB interface, enter show ip interface out-of-band.• For the VLAN 1 routing interface, enter show ip interface.To access the Dell OpenManage Switch Administrator interface, enter theOOB management interface IP address into the address field of a Webbrowser. For remote management access to the CLI, enter the VLAN 1management interface IP address into a Telnet or SSH client. Alternatively,you can continue to use the console port for local CLI access to the switch.Your N30xx switch supports basic switching features such as VLANs andspanning tree protocol. The N30xx switches also support advanced Layer 3features such as dynamic routing and multicast. Use the Web-basedmanagement interface or the CLI to configure the features your networkrequires. For information about how to configure the switch features, see theUser’s Configuration Guide or CLI Reference Guide available on the supportsite: dell.com/support/manuals.