Dell Networking C9010 Installation Manual

Also see for Networking C9010: Getting started guide

Contents

To install a rack mount tray in a rack, follow the instructions provided with the tray kit. Decide where youwant to mount the switch in the rack. Position the tray at that height and tighten it to the rack posts usingthe screws shipped with the tray (items 1 to 4 in Figure 17).Figure 17. Example of a Mount Rack Tray in a 4-Post RackAttaching the Chassis GroundAfter you mount the chassis in a rack, ground the device by attaching a chassis ground as follows:NOTE: The grounding cable is not shipped with the C9010 base configuration. You must order itseparately.1. Locate the chassis ground lug nut and holes on the bottom left side (facing you) of the chassis.26 Installing the Hardware