Dell OPTIPLEX 980 Technical Manualbook

Also see for OptiPlex 980 - Desktop: Specifications Setup & features Technical guidebook Administrator's guide Service manual

OptiPlex 980 Technical Guidebook Page 50Optiplex 980 SFFComponent High-end Configuration Typical Configuration EcoKit ConfigurationCPU Quad Core i7 2.8 GHz Dual Core i5 3.2 GHz Dual Core i5 3.2 GHzMemory 4 GB DDRIII 800 MHz 2 GB DDRIII 800 MHz 2 GB DDRIII 800 MHzHDD (#, capacity) 320 GB 7200 RPM SATA 160 GB 7200 RPM SATA 2.5” 160 GB 7200 RPM SATARMSD Slim DVD +/-RW Slim DVD +/-RW Slim DVD +/-RWGraphics Adapter AMD Radeon HD3470 256MB Integrated Adapter Integrated AdapterThe Declared Noise Emission in accordance with ISO 9296 for the Dell Optiplex 980 MT is as follows5:(all values LWAd expressed in bels6; 1 bel=10 decibels, re 10-12 Watts; all values LpA expressed in decibels3, re 2x10-5 Pa)Sound PowerSound Pressure at Operator Position5 All tests are conducted according to ISO 7779 and declared according to ISO 9296 except 90% CPU. For this mode, the systemCPU was stressed at 90% utilization with no other peripheral device actively seeking. This test mode is not specified in ISO 7779, butwas measured using the same microphone distances and measurement techniques defined for the other reported operating modes.6 Declared Sound Power rounded to the nearest tenth of a bel per ISO 9296 section 4.4.23 Declared Sound Pressure rounded to the nearest whole decibel per ISO 9296 section 4.4.4Operating ModeHigh-end ConfigurationDeclared Sound Power (LWAd)Typical ConfigurationDeclared Sound Power (LWAd)EcoKit ConfigurationDeclared Sound Power (LWAd)Idle 3.9 3.5 3.0HDD Operating 4.0 3.4 3.0ODD Operating 4.8 4.8 4.890% CPU 4.6 3.4 3.1Operating ModeHigh-end ConfigurationSound Pressure at OperatorPosition (LpA)Typical ConfigurationSound Pressure at OperatorPosition (LpA)EcoKit ConfigurationSound Pressure at OperatorPosition (LpA)

/ 51

Related manuals for Dell OptiPlex 980 - Desktop