Dell OptiPlex 3040 Owner's Manual
                                                   | |
Contents
|
Removing the intrusion switch1. Follow the procedure in Before Working Inside Your Computer.2. Remove the:• cover• bezel3. Open the front bezel door.4. To remove the intrusion switch:a. Disconnect the intrusion switch cable from the connector on the system board [1].b. Unroute the intrusion switch cable from the fan grommet [2].c. Slide the intrusion switch and lift it away from the computer [3].Installing the intrusion switch1. Insert the intrusion switch into the slot on the computer.2. Route the intrusion switch cable through the fan grommet.3. Connect the intrusion switch cable to the connector on the system board.4. Close the front bezel door.5. Install the:• bezel• cover6. Follow the procedure in After Working Inside Your Computer.Removing the power switch1. Follow the procedure in Before Working Inside Your Computer.2. Remove the:• cover• bezel3. Open the front bezel door.19 |
Related manuals for Dell OptiPlex 3040
Dell OptiPlex 3046 Owner's Manual
Dell OptiPlex 7040 Owner's Manual
Dell OptiPlex 3020 Owner's Manual
Dell OptiPlex 3010 Owner's Manual
Dell OptiPlex 3020 Owner's Manual
Dell OptiPlex 3050 Owner's Manual
Dell OptiPlex 3020M Owner's Manual
Dell OptiPlex 3020M Owner's Manual
Dell OptiPlex 3020M Owner's Manual
Dell OptiPlex 3020M Owner's Manual
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine