Dell OptiPlex 7440 All-In-One W11C Owner's Manual

Also see for OptiPlex 7440 All-In-One W11C: Quick start guide Owner's manual Owner's manual

Contents

Option Description• Enable Side USB Ports: Include options for 2 portsAll the options are enabled by default.NOTE: USB keyboard and mouse always work in the BIOS setup irrespective of these settings.Rear USBConfigurationThis field allows you to enable or disable rear USB ports.• Enable/Disable Rear USB PortsSide USBConfigurationThis field allows you to enable or disable side USB ports.• Enable/Disable Side USB PortsUSB PowerShare This field configures the USB PowerShare feature behavior. This option allows you to charge external devicesusing the stored system battery power through the USB PowerShare port.Audio This field enables or disables the integrated audio controller. By default, the Enable Audio option is selected. Theoptions are:• Enable Microphone (by default enable)• Enable Internal Speaker (by default enable)OSD ButtonManagementThis field allows you to enable or disable the OSD (On-Screen Display) buttons on the All-In-One system.• Disable OSD buttons: This option is unchecked by default.Touchscreen This option allows you to enable or disable touchscreen.MiscellaneousDevicesAllows you to enable or disable the following devices:• Enable Camera (enabled by default)• Enable Media Card (enabled by default)• Disable Media CardSecurity screen optionsOption DescriptionAdmin Password Allows you to set, change, or delete the administrator (admin) password.NOTE: You must set the admin password before you set the system or hard drive password.Deleting the admin password automatically deletes the system password and the hard drivepassword.NOTE: Successful password changes take effect immediately.Default setting: Not setSystem Password Allows you to set, change or delete the system password.NOTE: Successful password changes take effect immediately.Default setting: Not setInternal HDD-0PasswordAllows you to set, change or delete the system’s internal hard disk’s password.Default setting: Not setNOTE: Successful password changes take effect immediately.Strong Password Allows you to enforce the option to always set strong passwords.Default Setting: Enable Strong Password is not selected.NOTE: If Strong Password is enabled, Admin and System passwords must contain at least oneuppercase character, one lowercase character and be at least 8 characters long.System setup 67