Dell OptiPlex GX1 User Manual

Also see for OptiPlex GX1: Service manual Documentation update Reference and installation guide Service manual Reference and installation guide

Contents

Dell OptiPlex GX1 User Manual Manual pdf 110 page image

Expansion Cards: Dell OptiPlex GX1 Small-Form-Factor System User's Guidefile:///C|/infodev/2013/eDoc/OpGX1/UG/expcards.htm[2/21/2013 11:47:21 AM]5 Expansion-card cage4. When the card is firmly seated in the connector, secure the card's mounting bracket to the chassis withthe screw you removed in step 2.5. Connect any cables that should be attached to the card.See the documentation for the card for information about the card's cable connections.6. Replace the expansion-card cage.7. Replace the computer cover, and reconnect your computer and peripherals to their electrical outletsand turn them on.NOTE: If Enabled, the Chassis Intrusion option will cause the following message to be displayedat the next system start-up:ALERT! Cover was previously removed.Removing an Expansion CardTo remove an expansion card, perform the following steps.CAUTION: To avoid the possibility of electric shock, turn off the computer and any peripherals,disconnect them from electrical outlets, and then wait at least 5 seconds before you removethe computer cover. Also, before removing the computer cover, see the other precautions in"Safety First—For You and Your Computer."1. Remove the computer cover.2. If necessary, disconnect any cables connected to the card.3. Unscrew the mounting bracket of the card you want to remove.