Changing Boot Sequence for the Current BootYou can use this feature, for example, to tell the computer to boot from the CD drive so that you can run the Dell Diagnostics on the Drivers and Utilities CD, butyou want the computer to boot from the hard drive when the diagnostic tests are complete. You can also use this feature to restart your computer to a USBdevice such as a floppy drive, memory key, or CD drive.1. If you are booting to a USB device, connect the USB device to a USB connector.2. Turn on (or restart) your computer.3. When F2 = Setup, F12 = Boot Menu appears in the upper-right corner of the screen, press .If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft Windows desktop. Then shut down yourcomputer and try again.The Boot Device Menu appears, listing all available boot devices. Each device has a number next to it.4. At the bottom of the menu, enter the number of the device that is to be used for the current boot only.For example, if you are booting to a USB memory key, highlight USB Device and press .Changing Boot Sequence for Future Boots1. Enter system setup.2. Use the arrow keys to highlight the Boot Sequence menu option and press to access the pop-up menu.3. Press the up- and down-arrow keys to move through the list of devices.4. Press the spacebar to enable or disable a device. (Enabled devices have a checkmark.)5. Press or to move a selected device up or down the list.Booting to a USB DeviceMemory Key1. Insert the memory key into a USB port and restart the computer.2. When F12 = Boot Menu appears in the upper-right corner of the screen, press .The BIOS detects the device and adds the USB device option to the boot menu.3. From the boot menu, select the number that appears next to the USB device.The computer boots to the USB device.Floppy Drive1. In system setup, set the Diskette Drive option to USB.2. Save and exit system setup.3. Connect the USB floppy drive, insert a bootable floppy, and re-boot the system.NOTE: If you are booting to a USB floppy drive, you must first set the floppy drive to USB in system setup.NOTE: To boot to a USB device, the device must be bootable. To make sure your device is bootable, check the device documentation.NOTE: Write down your current boot sequence in case you want to restore it.NOTE: To boot to a USB device, the device must be bootable. To ensure that your device is bootable, check the device documentation.
