Dell OptiPlex N7132 Quick Reference Manual

Also see for GX280 - OptiPlex - SD: Quick reference guide Quick reference guide User guide User guide Quick reference guide

Contents

32 Quick Reference Guidew w w . d e l l . c o m | s u p p o r t . d e l l . c o m 12 If you are reinstalling Windows XP Professional and you are prompted to provide furtherinformation regarding your network configuration, enter your selections. If you are unsure ofyour settings, accept the default selections.Windows XP installs the operating system components and configures the computer. Thecomputer automatically restarts.NOTICE: Do not press any key when the following message appears: Press any key to bootfrom the CD.13 When the Welcome to Microsoft screen appears, click Next.14 When the How will this computer connect to the Internet? message appears,click Skip.15 When the Ready to register with Microsoft? screen appears, select No, not at this time andclick Next.16 When the Who will use this computer? screen appears, you can enter up to five users.17 Click Next.18 Click Finish to complete the setup, and remove the CD.19 Reinstall the appropriate drivers with the Drivers and Utilities CD.20 Reinstall your virus protection software.21 Reinstall your programs.NOTE: To reinstall and activate your Microsoft Office or Microsoft Works Suite programs, you need theProduct Key number located on the back of the Microsoft Office or Microsoft Works Suite CD sleeve.Using the Drivers and Utilities CDNOTE: The Drivers and Utilities CD (ResourceCD) is optional and therefore may not ship with allcomputers.To use the Drivers and Utilities CD (also known as the ResourceCD) while you are running theWindows operating system:NOTE: To access device drivers and user documentation, you must use the Drivers and Utilities CD whileyou are running Windows.1 Turn on the computer and allow it to boot to the Windows desktop.2 Insert the Drivers and Utilities CD into the CD drive.If you are using the Drivers and Utilities CD for the first time on this computer, theResourceCD Installation window opens to inform you that the Drivers and Utilities CD isabout to begin installation.3 Click OK to continue.To complete the installation, respond to the prompts offered by the installation program.