Dell OptiPlex SX260 Setup And Quick Reference Manual

Also see for OptiPlex SX260: Setup and quick reference guide

Contents

Setup and Quick Reference Guide 11Protecting Against Electrostatic DischargeStatic electricity can harm delicate components inside your computer. To prevent static damage,discharge static electricity from your body before you touch any of your computer’s electroniccomponents, such as the microprocessor. You can do so by touching an unpainted metal surface on thecomputer chassis.As you continue to work inside the computer, periodically touch an unpainted metal surface to removeany static charge your body may have accumulated.You can also take the following steps to prevent damage from electrostatic discharge (ESD):• Do not remove components from their antistatic packing material until you are ready to install thecomponent in your computer. Just before unwrapping the antistatic packaging, discharge staticelectricity from your body.• When transporting an electrostatic sensitive component, first place it in an antistatic container orpackaging.• Handle all electrostatic sensitive components in a static-safe area. If possible, use antistatic floorpads and workbench pads.Battery DisposalYour computer uses a lithium coin-cell battery. The lithium coin-cell battery is a long-life battery, and it isvery possible that you will never need to replace it. However, should you need to replace it, see your User’sGuide.Do not dispose of the battery along with household waste. Contact your local waste disposal agency forthe address of the nearest battery deposit site.When Using Your Computer (continued)