Dell P2010H User Manual
Also see for P2010H: Setup guide
                                     | |
Contents
| 
To attach the soundbar:Removing the StandTo remove the stand:1. Place the monitor on a flat surface.2. Press and hold the Stand release button.3. Lift the stand up and away from the monitor.Wall Mounting (Optional)NOTICE: Do not use with any device other than the Dell Soundbar.NOTE: The soundbar power connector (+12 V DC output) is for the optional Dell Soundbar only.1. Working from the back of the monitor, attach the Soundbar by aligning the two slots with the two tabs along the bottom of the monitor.2. Slide the Soundbar to the left until it snaps into place.3. Connect the Soundbar with the DC power connector.4. Insert the mini stereo plug from the back of the Soundbar into the computer's audio output jack.NOTE: To prevent scratches on the LCD screen while removing the stand, ensure that the monitor is placed on a soft, clean surface. |
Related manuals for Dell P2010H
manualsdatabase
Your AI-powered manual search engine