Dell P2010H User Manual

Also see for P2010H: Setup guide

Dell P2010H User Manual Manual pdf 7 page image

*[P2010H] color gamut (typical) is based on CIE1976 (83%) and CIE1931 (72%) test standards.Resolution SpecificationsSupported Video ModesPreset Display ModesElectrical SpecificationsPhysical CharacteristicsScreen dimensions 20 inches (20-inch viewable image size)Preset display area: 442.8(H) X 249.1(V)Horizontal 442.8(H) mm (17.4 inches)Vertical 249.1(V) mm (9.8 inches)Pixel pitch 0.277 mmViewing angle 160° (vertical) typical, 170° (horizontal) typicalLuminance output 250 CD/m²(typical)Contrast ratio 1000 to 1 (typical), 10000 to 1 (typical Dynamic Contrast On)Faceplate coating Antiglare with hard-coating 3HBacklight 2-CCFL edgelight systemResponse Time 5ms panel typicalColor depth 16.7 million colorsColor Gamut 83%*Horizontal scan range 30 kHz to 83 kHz (automatic)Vertical scan range 56 Hz to 76 Hz (automatic)Maximum preset resolution 1600 X 900 at 60 HzVideo display capabilities (DVI & DP playback) 480p, 576p, 720p, 1080pDisplay Mode Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (Horizontal/Vertical)VESA, 720 x 400 31.5 70.0 28.3 -/+VESA, 640 x 480 31.5 60.0 25.2 -/-VESA, 640 x 480 37.5 75.0 31.5 -/-VESA, 800 x 600 37.9 60.3 40.0 +/+VESA, 800 x 600 46.9 75.0 49.5 +/+VESA, 1024 x 768 48.4 60.0 65.0 -/-VESA, 1024 x 768 60.0 75.0 78.8 +/+VESA, 1152 x 864 67.5 75.0 108.0 +/+VESA, 1600 x 900 60.0 60.0 108.0 +/+Video input signalsAnalog RGB, 0.7 Volts +/- 5%, positive polarity at 75 ohm inputimpedanceDigital DVI-D TMDS, 600mV for each differential line, positive polarity at50 ohm input impedanceDP 1.1a signal input supportSynchronization input signals TTL levels required and separate syncs (including Trigger points), SOG(Composite SYNC on green)AC inputvoltage/frequency/current 100 to 240 VAC/50 or 60 Hz + 3 Hz/1.5A (Typical)Inrush current 120 V: 30 A (Max.)240 V: 60 A (Max.)Connector type 15-pin D-subminiature, blue connector; DVI-D, whiteconnector;DP,black connector.