3. Align two bottom insert pins on cable 4. Once the insertion is done, gentlycover to corresponding holes on the push the cable cover down towardsmonitor rear, then gently insert the the monitor, until the rest of insert pinspins into the small holes provided. click into place.Wall Mounting (Optional)(Screw dimension: M4 x 10 mm).Refer to the instructions that come with the VESA-compatible basemounting kit.1. Place the monitor panel on a soft cloth or cushion on a stable, flattable.2. Remove the stand.3. Use a screwdriver to remove the four screws securing the plasticcover.4. Attach the mounting bracket from the wall mounting kit to the LCD.5. Mount the LCD on the wall by following the instructions that camewith the wall mounting kit.NOTE: For use only with UL-listed wall mount bracket with minimumweight/load bearing capacity of 9 kg.Setting Up the Monitor 29
