Dell P2714HThe dispaly will go into Power Save Mode in 5 minutesNo VGA Cable?4. This box also appears during normal system operation, if the videocable becomes disconnected or damaged. The monitor will enterPower Save Mode after 5 minutes if left at this state.5. Turn off your monitor and reconnect the video cable; then turn onboth your computer and the monitor.If your monitor screen remains blank after you use the previousprocedure, check your video controller and computer, because yourmonitor is functioning properly.NOTE: Self-test feature check is not available for S-Video, Composite,and Component video modes.Built-in DiagnosticsYour monitor has a built-in diagnostic tool that helps you determine if thescreen abnormality you are experiencing is an inherent problem with yourmonitor, or with your computer and video card.54321NOTE: You can run the built-in diagnostics only when the video cableis unplugged and the monitor is in self-test mode.Troubleshooting 51
