Warning—Potential Damage: Do not touch any cables, any network adapter,any connector, the memory device, or the printer in the areas shown whileactively printing, reading, or writing from the memory card. A loss of data canoccur.3 If the PictBridge connection is successful, then the following message appears on the display: Use Camera tochoose and print photos. Press OK to select printer default settings.4 If you want to change the default print settings:a Press to access the PictBridge menu.b Press the arrow buttons to select the paper size, paper type, photo size, and layout of the photos that youwant to print. Press each time you make a selection.Note: The printer will use the default print settings unless you change the print settings from the camera.5 See the documentation for your camera to begin printing.Note: If you insert the camera while the printer is performing another job, then wait for the job to finish beforeprinting from the camera.Printing photos from a memory device using the proof sheet1 Load letter- or A4-size plain paper.2 From the printer control panel, press .3 Insert a memory card or flash drive.If document files and image files are stored on the memory device, then press to select Photos.4 Press the up or down arrow button to scroll to Proof Sheet, and then press .5 Press the up or down arrow button to select an option to print a proof sheet.You can print a proof sheet:• For the 20 most recent photos, if there are 20 or more photos on the memory device.• For all photos on the memory device.• By date, if the photos on the card were taken on different dates. If you choose this option, then press the arrowbuttons to set the start and end dates, and then press to save your selections.6 Press .The proof sheet prints.7 Follow the instructions on the proof sheet to select which photos to print, the number of copies per photo, red-eyereduction, page layout, print options, and paper size.Note: When making selections, make sure to fill in the circles completely.Printing33
