1. Insert one end of the USB cable into the camera.2. Insert the other end of the USB cable into the PictBridge connector on the front of the printer.See the instructions included with your camera for selection of the appropriate camera USB settings and PictBridge connection and usage information.3. Turn on your digital camera.The printer automatically enters PictBridge mode.4. See the instructions included with your camera to begin printing photos.Printing From a Bluetooth®-Enabled DeviceBluetooth is a short-range radio technology that enables wireless connectivity between electronic devices.RangeThe recommended maximum distance between Bluetooth devices for the highest transfer speed is 10 meters or 32.81 feet.Printing1. Insert your Kodak Bluetooth Adapter into the Pictbridge connector.Wait until the LED in the Bluetooth Adapter turns on.2. Discover your printer on your Bluetooth®-enabled device.Your printer supports the following types of Bluetooth enabled devices:l Mobile camera phonesl PDAsl Digital still camerasNOTE: When you connect a PictBridge camera to your printer, then all the functions from operator panel buttons become unavailable. The printergets into PictBridge mode and waits for the camera to send pictures that should be printed. Operator panel buttons become available after youdisconnect the PictBridge camera from your printer.NOTE: For many digital cameras, there are two USB mode selections, computer and printer (or PTP). For PictBridge printing, the printer (or PTP)USB selection should be used. For more information, see the documentation that shipped with your camera.NOTICE: Do not remove the PictBridge-enabled device or touch the printer near the area of the memory card or PictBridge-enabled device while activelyprinting from PictBridge. Data corruption can occur.