8 │ Charging your power hubCharging your power hubWARNING: To avoid injury and damaging your device, only use thepower adapter shipped with your power bank.Before first use, charge the power hub using the power cord.NOTE: It takes approximately 3 hours to fully charge the power hub.NOTE: You can charge your devices through the power hub while thepower hub is getting charged.NOTE: The power adapter is shipped with the power bank.Holding onto Adapter whileremoving Power Supply Cable1. Ensure the power adapter is fully attached to your power bank.2. Connect the power adapter to an electrical outlet.• The battery-status light turns on (flashing white) indicating the batteryis getting charged. Refer to “Checking battery charge status” sectionfor details.• The battery-status lights turn off when the battery is fully charged orwhen the power adapter is disconnected.NOTE: If the amber battery-status light lights up and flashes while thebattery is charging, this indicates a charging error. Check if you havefirmly attached the power adapter with power bank.NOTE: For more information on battery-status lights, see “Checkingbattery charge status”.