54 Using the System Setup ProgramAdditionally, for Microsoft® Windows® operating systems, you will need toinstall the AMD PowerNow!™ driver to enable this feature. The driver isavailable on the Dell OpenManage™ Service and Diagnostic CD providedwith your system, and at support.dell.com.Integrated Devices ScreenTable 2-5 lists the options and descriptions for the information fields thatappear on the Integrated Devices screen.Table 2-5. Integrated Devices Screen OptionsOption DescriptionIntegrated SAS/RAIDController(Enabled default)Enables or disables the integrated SAS controller.Optical Drive Controller(On default)Enables or disables the integrated optical drive controller.User Accessible USB Ports(All Ports On default)Enables or disables the system’s user accessible USBports. Options are All Ports On, Only Back Ports On, andAll Ports Off.Internal USB Port(On default)Enables or disables the system’s internal USB port.SD Card Port Enables or disables the system’s internal SD card port.Embedded Gb NICx(NIC1 default: Enabledwith PXE;Other NICs: Enabled)Enables or disables the system's integrated NIC. Optionsare Enabled, Enabled with PXE, Enabled with iSCSIBoot, and Disabled. PXE support allows the system toboot from the network. Changes take effect after thesystem reboots.MAC Address Displays the MAC address for the integrated 10/100/1000NIC. This field does not have user-selectable settings.Capability Detected Displays the NIC features provided by the LOM NIChardware key installed in the TOE_KEY socket on thesystem board.NOTE: Some LOM features may require the installation ofan additional driver.
