56 Dell PowerConnect 28xx Systems User GuideDevice Management ButtonsDevice Management buttons provide an easy method of configuring device information, and includesthe following:Starting the Application1 Open a web browser.2 Enter the device’s IP address (as defined in the CLI) in the address bar and press .For information about assigning an IP address to a device, see "Static IP Address and Subnet Mask."3 When the Enter Network Password window opens, enter a user name and password.NOTE: The device is not configured with a default password, and can be configured without entering apassword. For information about recovering a lost password, see “Password Recovery.NOTE: Passwords are both case sensitive and alpha-numeric.NOTE: The device can be managed via web interface only in Managed mode. For more information aboutmanagement modes, see "Management Modes" on page 51.4 Click OK.The Dell PowerConnect OpenManage™ Switch Administrator home page opens.Access LevelsWhen you login to the device, you are automatically assigned one of the following modes, based uponthe access level assigned to you:Table 5-3. Device Management ButtonsButton DescriptionApply Changes Applies changes to the device.Add Adds information to tables or dialogs.Telnet Starts a Telnet session.Query Queries tables.Show All Displays the device tables.Left arrow/Right arrow Moves information between lists.Refresh Refreshes device information.Reset All Counters Clears statistic counters.Print Prints the Network Management System page and/ortable information.Draw Creates statistics charts on-the-fly.
